Concept demonstration
AI Warehouse Monitoring
A design study for watching zone conditions and aisle activity, using sensor nodes plus a camera check at marked points.
This page describes a design study SATHURIX can discuss with a client. It is not a completed customer deployment.
Project overview
Problem
A sensor fault and a camera fault are different incidents, and they are easy to mix into one alert.
Proposed solution
The study lays out wireless nodes for temperature and door state, an MQTT broker as the message bus, and a vision service that flags a blocked aisle or an unexpected object in a marked zone. It shows how those parts would be separated so a sensor fault and a camera fault are not the same incident.
How the study is framed
- 1.Publish each zone as its own set of MQTT topics, with a retained last reading.
- 2.Keep the camera task limited to marked zones rather than the whole floor.
- 3.Show both the sensor value and the latest frame to the person who acknowledges an alert.
Demonstration
The recording below is the existing demonstration. It stays on this page with the interactive simulation.
Discuss this project
Tell us which part of this design study matches the site you operate. The conversation is about a possible build, not a system already running.
Discuss this project