Concept demonstration
Embedded Systems Playground
Explore intelligent electronic systems that connect physical hardware to digital platforms.
This page describes a design study SATHURIX can discuss with a client. It is not a completed customer deployment.
Project overview
Problem
A product needs a clear path from pins and sensors to firmware and a report the software can use.
Proposed solution
A development board with an ESP32 or STM32 microcontroller reads sensors over GPIO, ADC, I2C, SPI and UART, runs firmware under FreeRTOS, and reports to a cloud or local platform. The playground shows how each interface, the firmware loop and the connection to the digital side fit together.
How the study is framed
- 1.Choose the microcontroller from the interfaces, power budget and radio the product needs.
- 2.Structure firmware as tasks with clear inputs and outputs so each sensor can be tested alone.
- 3.Plan over-the-air updates and a safe fallback before the first device ships.
Demonstration
This study has no screen recording. The interactive simulation is the demonstration.
Open interactive simulationWhere this could help
Potential benefit: hardware and the software that uses its data are designed together, so they fit first time.
Discuss this project
Tell us which part of this design study matches the site you operate. The conversation is about a possible build, not a system already running.
Discuss this project