Concept demonstration
Industrial Sensor Monitoring
A design study for reading vibration, temperature, and current from a machine and showing the trend to a maintenance engineer.
This page describes a design study SATHURIX can discuss with a client. It is not a completed customer deployment.
Project overview
Problem
Maintenance needs the live reading in engineering units before any prediction is discussed.
Proposed solution
A microcontroller samples the sensors at the machine. An ESP32 gateway publishes the readings. The history is plotted against a threshold the maintenance lead sets, rather than against a claimed prediction of failure. A later model can be added only after enough labelled history exists.
How the study is framed
- 1.Sample at a rate that matches the fault you are trying to see, and document that rate.
- 2.Keep engineering units in the payload so the dashboard does not invent a scale.
- 3.Separate the live reading from any later model so a model outage does not hide the sensor.
Demonstration
The recording below is the existing demonstration. It stays on this page with the interactive simulation.
Discuss this project
Tell us which part of this design study matches the site you operate. The conversation is about a possible build, not a system already running.
Discuss this project