Concept demonstration

IoT Mobile Control Application

An illustrative phone layout for switching a device, setting brightness, and reading sample sensors.

This page describes a design study SATHURIX can discuss with a client. It is not a completed customer deployment.

Concept illustration of a microcontroller board with sensors and a camera, a laptop analytics screen, and a phone showing temperature, humidity, and a device switch. — Generated concept illustration of a board, sensors, a laptop screen, and a handset layout together on a desk. The phone is not paired to hardware, and the charts are drawn into the picture. The working phone controls are in the demonstration video.

Project overview

Problem

The on, off, and weak-link actions need to be agreed before a handset app is built for hardware the operator already owns.

Proposed solution

The study shows the controls a Flutter app could offer for a device the operator already owns. The phone on this site does not pair with hardware.

How the study is framed

1.List the actions that must work when the link is weak.
2.Show connection state in the same view as the switch.
3.Keep alerts tied to a rule you can read, not a hidden score.

Demonstration

The recording below is the existing demonstration. It stays on this page with the interactive simulation.

Screen recording of the phone demo: brightness changes, the link goes weak and offline, and the device is switched off and on. All state stays in the page.

Open interactive simulation

Where this could help

People can agree the on-site controls before a store build or a radio protocol is frozen.

Discuss this project

Tell us which part of this design study matches the site you operate. The conversation is about a possible build, not a system already running.

Discuss this project

Related studies

IoT Mobile Control Application

An illustrative phone layout for switching a device, setting brightness, and reading sample sensors.

This page describes a design study SATHURIX can discuss with a client. It is not a completed customer deployment.

Generated concept illustration of a board, sensors, a laptop screen, and a handset layout together on a desk. The phone is not paired to hardware, and the charts are drawn into the picture. The working phone controls are in the demonstration video.

Project overview

Problem

The on, off, and weak-link actions need to be agreed before a handset app is built for hardware the operator already owns.

Proposed solution

The study shows the controls a Flutter app could offer for a device the operator already owns. The phone on this site does not pair with hardware.

How the study is framed

1.List the actions that must work when the link is weak.

2.Show connection state in the same view as the switch.

3.Keep alerts tied to a rule you can read, not a hidden score.